Fanuc 0-0i

LCD12-0002 LCD utbytes monitor för Fanuc A61L-0001-0074
TFT/LCD 12,1“ Industry monitor as a replacement for 14“ CNC Color Monitor
A61L-0001-0074 Fanuc
Series:
6M, 6T, 10T, 10M, 11M, 11T, 15A,15B,15M,15T,0-MC, 0-TC, 0-MD, 16,18,20,16T,16M,18M,20T
CRT tube monitor:
A61L-0001-0074, A61L-0001-0094, A61L-0001-0096, A02B-0200-C071, A02B-0094-C041, DNC74, DNC94, DNC96
Toshiba D14CM-01A, Hitachi C14X-1472DF, Matsushita TX-1450ABA, Tatung CD14JBS, TX-1450ABA, TX-1424AB, TX-1450AB5

Brief description:
This 12.1“ TFT installation monitor has been designed as replacement for 14“ tube monitor of FANUC control units. Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 12.1“ TFT full colour active / 800×600 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Settings via OSD (On Screen Display)
Active area TFT screen 249 x 188 mm (W x H)
Housing compatible
Graphics controller FANUC
Connector 20 pole Honda connector blue male, silver male and female
Power supply AC 85-240V connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD12-0002
Article description: 12.1“ TFT installation monitor with angle and curvature

LCD84-0010 utbytes monitor TFT/LCD 8,4“ för 9“ CNC Color Monitor
A61L-0001-0090 Fanuc series: 15, 16, 18, 20, 0B

CRT tube monitor: A61L-0001-0090, A61L-0001-0095, DNC90, DNC95
Brief description:
This 8.4“ TFT installation monitor has been designed as replacement for 9“ tube monitor (colour) of FANUC control units of this series. Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 8.4“ TFT full colour active / 640×480 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Settings via OSD (On Screen Display)
Active area TFT screen 174 x 131 mm (W x H)
Housing compatible
Graphics controller FANUC
Connector 20 pole Honda connector blue female
Power supply AC 85-240V rubber connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD84-0010
Article description: 8.4“ TFT installation monitor with angle, curvature and protection plate
LCD84N-CACS-KR-FANUC

LCD84-0079 utbytes monitor TFT/LCD 8,4“ för 9“ CNC Monitor monochrom A61L-0001-0071

Fanuc: 0, 0M, 0T, 6, 6MB, 6TB, 6T, 6B, 6M, 11, 11M, 11T
CRT bildrörs monitorer:
A61L-0001-0071, A61L-0001-0072, A61L-0001-0079, A61L-0001-0086, A61L-0001-0092, A61L-0001-0076, DNC92, MDT947B1A

Kort beskrivning skärm:
LCD84-0079 8.4“ TFT/LCD  monitorn ersätter FANUCS A61L-0001-0071, A61L-0001-0072, A61L-0001-0079, A61L-0001-0086, A61L-0001-0092, A61L-0001-0076, DNC92, MDT947B1A bildrörs monitorer.
Plug and Play principen gör att demontering/montering går snabbt och enkelt via några få steg.

Teknisk Specifikation:
Typ / Upplösning 8.4“ aktiv TFT full färg / 640×480 pixlar
Ljusstyrka 300 cd/m2
Frekvens 15-45 kHz horisontal, 50-75 Hz vertikal
Signal in RGB analog eller TTL
Inställningar via OSD (On Screen Display)
Aktivt område TFT monitor 174 x 131 mm (B x H)
Inbyggnadskompatibel med FANUCS skärm:
Frontpanel RAL 9005 med antireflex, korrekt monterad uppfyller frontpanelen på skärmen IP65
Grafik serie 0T(grön bildrörsskärm) FANUC
Kontakt 20 pin HONDA kontakt blå hona
Strömförsörjning DC 24 V
Arbetstemperatur -10 °C till +55°C
Bildskärmen är tillverkad enligt CE industri standard, EN55022, EN55024
Order nummer: LCD84-0079
Produkt beskrivning: 8.4“ TFT display för inbyggnad med vinkel och cirkel LCD84N-CACS-KR-FAN86.