Fanuc

8540241 LQ10D367 Sharp display – utbyte för Fanuc CNC 160i-LA, 18i, 20i and 21i
A61L-0001-0163 och A61L-0001-0168
Brief description:
This 10.4″ TFT panel LQ10D367 is an obsoleted display by Sharp.
With the new backlight it is a spare part for operator panel by Fanuc A61L-0001-0163 and A61L-0001-0168.
Technical specifications:
Manufacturer Sharp
Product name
LQ10D367
Size 10.4″
Resolution 640 x 480 pixels
Brightness 200 cd/m2
Backlight 1 CFL new
Contrast ratio
300:1
Interfaces 6bit TTL
Outline dimension
179.4 x 246.5 x 10.5 mm (W x H x D)
Temperature range -10 °C to 55°C
Order number: 8540241 (LQ10D367 Sharp Display)

LCD10-0006 TFT/LCD 10,4“ utbytes monitor för Fanuc 12“ CNC Color Monitor A61L-0001-0077
series: 3, 3M, 3T, 10, 11
CRT tube monitor:A61L-0001-0077, A61L-0001-0087, DNC77, DNC87
Brief description:
This 10.4“ TFT installation monitor has been designed as replacement for 12“ tube monitor of FANUC
control units of this series.
Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 10.4“ TFT full colour active / 640×480 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Input signal RGB analogue or TTL
Settings via OSD (On Screen Display)
Active area TFT screen 216 x 163 mm (W x H)
Housing compatible
Graphics controller series 3, 3M, 3T, 10, 11 of FANUC
Connector 20 pole Honda connector blue female
Power supply AC 85-240V rubber connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD10-0006
Article description: 10.4“ TFT installation monitor with angle and curvature
LCD10N-CACS-KR-FANUC

LCD10-0103 TFT/LCD 10,4“ Utbytes monitor för 12“ mochrom CNC Monitor
A61L-0001-0073 Fanuc Serie 3, 3M, 3T, 10, 11

CRT tube monitor:A61L-0001-0073, DNC73
Brief description:
This 10.4“ TFT installation monitor has been designed as replacement for 12“ tube monitor of FANUC
control units of this series.
Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 10.4“ TFT full colour active / 640×480 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Input signal TTL
Settings via OSD (On Screen Display)
Active area TFT screen 216 x 163 mm (W x H)
Housing compatible
Graphics controller DNC 73 of FANUC
Connector 10 pin. Monitor jack
Power supply AC 85-240V rubber connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD10-0103
Article description: 10.4“ TFT installation monitor with angle and curvature
LCD10N-CACS-KR-FANUC

LCD12-0002 LCD utbytes monitor för Fanuc A61L-0001-0074
TFT/LCD 12,1“ Industry monitor as a replacement for 14“ CNC Color Monitor
A61L-0001-0074 Fanuc
Series:
6M, 6T, 10T, 10M, 11M, 11T, 15A,15B,15M,15T,0-MC, 0-TC, 0-MD, 16,18,20,16T,16M,18M,20T
CRT tube monitor:
A61L-0001-0074, A61L-0001-0094, A61L-0001-0096, A02B-0200-C071, A02B-0094-C041, DNC74, DNC94, DNC96
Toshiba D14CM-01A, Hitachi C14X-1472DF, Matsushita TX-1450ABA, Tatung CD14JBS, TX-1450ABA, TX-1424AB, TX-1450AB5

Brief description:
This 12.1“ TFT installation monitor has been designed as replacement for 14“ tube monitor of FANUC control units. Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 12.1“ TFT full colour active / 800×600 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Settings via OSD (On Screen Display)
Active area TFT screen 249 x 188 mm (W x H)
Housing compatible
Graphics controller FANUC
Connector 20 pole Honda connector blue male, silver male and female
Power supply AC 85-240V connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD12-0002
Article description: 12.1“ TFT installation monitor with angle and curvature

LCD84-0010 utbytes monitor TFT/LCD 8,4“ för 9“ CNC Color Monitor
A61L-0001-0090 Fanuc series: 15, 16, 18, 20, 0B

CRT tube monitor: A61L-0001-0090, A61L-0001-0095, DNC90, DNC95
Brief description:
This 8.4“ TFT installation monitor has been designed as replacement for 9“ tube monitor (colour) of FANUC control units of this series. Conversion with plug and play is quick and easy with a few simple steps.
Technical specifications:
Display / resolution 8.4“ TFT full colour active / 640×480 pixels
Brightness 300 cd/m2
Frequency 15-45 kHz horizontal, 50-75 Hz vertical
Settings via OSD (On Screen Display)
Active area TFT screen 174 x 131 mm (W x H)
Housing compatible
Graphics controller FANUC
Connector 20 pole Honda connector blue female
Power supply AC 85-240V rubber connector with safety fuse
Temperature range -10 °C to 55°C
Monitor has been manufactured according to CE industry standards, EN55022, EN55024
Order number: LCD84-0010
Article description: 8.4“ TFT installation monitor with angle, curvature and protection plate
LCD84N-CACS-KR-FANUC